OpenBSD 5.0 (GENERIC) #53: Wed Aug 17 10:07:52 MDT 2011
    deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1072680960 (1022MB)
avail mem = 1030094848 (982MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3ffffea0 (11 entries)
bios0: vendor Seabios version "0.5.1" date 01/01/2007
bios0: Red Hat KVM
acpi0 at bios0: rev 0
acpi0: sleep states S5
acpi0: tables DSDT FACP SSDT APIC
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5645, 2400.50 MHz
cpu0: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT,AES,NXE,LONG
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: apic clock running at 1000MHz
mpbios0: bus 0 is type PCI   
mpbios0: bus 1 is type ISA   
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
vmt0 at mainbus0
vmware: open failed, eax=564d5868, ecx=0000001e, edx=00005658
vmt0: failed to open backdoor RPC channel (TCLO protocol)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
wd0: 16-sector PIO, LBA48, 102400MB, 209715200 sectors
wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 0
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 2 int 11
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 2 int 9
iic0 at piixpm0
iic0: addr 0x4c 48=00 words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x4e 48=00 words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
vga1 at pci0 dev 2 function 0 unknown vendor 0x1234 product 0x1111 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel PRO/1000MT (82540EM)" rev 0x03: apic 2 int 11, address 52:54:05:00:21:92
"Qumranet Virtio Memory" rev 0x00 at pci0 dev 4 function 0 not configured
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: density unknown
fd1 at fdc0 drive 1: density unknown
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
nvram: invalid checksum
mtrr: Pentium Pro MTRR support
uhidev0 at uhub0 port 1 configuration 1 interface 0 "QEMU 0.12.1 QEMU USB Tablet" rev 1.00/0.00 addr 2
uhidev0: iclass 3/0
uhid0 at uhidev0: input=6, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (392b4d9762a8d8fd.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout