Script started on Wed Sep 24 15:44:41 2014
uaa@framboise:~$ epicon -s 115200 -l /dev/ttyU1

** Welcome to epicon Version-5.0 Copyright Isamu Yamauchi compiled:May  7 2014 **
      exec shell         ~! 
      send binary files  ~f
      call rz,sz,sx,rx   ~rz,~sz,~sx,~rx
      call kermit        ~sk,~rk
      external command   ~C 
      change speed       ~c 
      exit               ~. 
      Connected /dev/ttyU1 

U-Boot SPL 2014.04-10694-g2ae8b32-dirty (Sep 24 2014 - 14:48:05)
Board: Bananapi
DRAM: 1024 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
spl: not an uImage at 1600


U-Boot 2014.04-10694-g2ae8b32-dirty (Sep 24 2014 - 14:48:05) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Board: Bananapi
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   dwmac.1c50000
Hit any key to stop autoboot:  0 
reading uEnv.txt
** Unable to read file uEnv.txt **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
reading boot.scr
** Unable to read file boot.scr **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
reading script.bin
50908 bytes read in 29 ms (1.7 MiB/s)
reading uImage
** Unable to read file uImage **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
sun7i# printenv
autoboot=run loadkernel && run setargs && true && bootm 0x48000000
baudrate=115200
boot_ram=saved_stdout=$stdout;setenv stdout nc;if iminfo 0x41000000; then true; setenv stdout $saved_stdout; source 0x41000000;else setenv stdout $saved_stdout;fi
bootcmd=if run loadbootenv; then echo Loaded environment from ${bootenv};env import -t ${scriptaddr} ${filesize};fi;if test -n "${uenvcmd}"; then echo Running uenvcmd ...;run uenvcmd;fi;if run loadbootscr; then echo Jumping to ${bootscr};source ${scriptaddr};fi;run autoboot;
bootdelay=2
bootenv=uEnv.txt
bootm_size=0x10000000
bootscr=boot.scr
console=ttyS0,115200
device=mmc
ethact=dwmac.1c50000
ethaddr=02:99:03:c2:d2:6e
filesize=c6dc
kernel=uImage
loadbootenv=fatload $device $partition $scriptaddr ${bootenv} || ext2load $device $partition $scriptaddr boot/${bootenv} || ext2load $device $partition $scriptaddr ${bootenv}
loadbootscr=fatload $device $partition $scriptaddr ${bootscr} || ext2load $device $partition $scriptaddr boot/${bootscr} ||ext2load $device $partition $scriptaddr ${bootscr}
loadkernel=if bootpath=/boot/ && ext2load $device $partition 0x43000000 ${bootpath}${script} && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; elif bootpath=/ && fatload $device $partition 0x43000000 ${script} && fatload $device $partition 0x48000000 ${kernel};then true; elif bootpath=/ && ext2load $device $partition 0x43000000 ${bootpath}${script} && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; else false;fi
loglevel=8
panicarg=panic=10
partition=0:1
script=script.bin
scriptaddr=0x44000000
setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "/boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs}
stderr=serial
stdin=serial
stdout=serial

Environment size: 1935/131068 bytes
sun7i# version

U-Boot 2014.04-10694-g2ae8b32-dirty (Sep 24 2014 - 14:48:05) Allwinner Technology
arm-none-eabi-gcc (GCC) 4.8.3
GNU ld (GNU Binutils) 2.24
sun7i# 
Disconnected
uaa@framboise:~$ exit

Script done on Wed Sep 24 15:46:04 2014