Script started on Mon Sep 24 20:15:41 2018 uaa@framboise:~/z/rt-thread/bsp/allwinner_tina$ epicon -s 115200 -l /dev/ttyU1 ** Welcome to epicon Version-5.1 Copyright Isamu Yamauchi compiled:Apr 22 2018 ** exec shell ~! send binary files ~f call rz,sz,sx,rx ~rz,~sz,~sx,~rx call kermit ~sk,~rk external command ~C change speed ~c exit ~. Connected /dev/ttyU1 U-Boot SPL 2018.01-05679-g013ca457fd (Sep 24 2018 - 11:19:23) DRAM: 32 MiB Trying to boot from MMC1 U-Boot 2018.01-05679-g013ca457fd (Sep 24 2018 - 11:19:23 +0900) Allwinner Technology CPU: Allwinner F Series (SUNIV) Model: Lichee Pi Nano DRAM: 32 MiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial@1c25000 Out: serial@1c25000 Err: serial@1c25000 Net: No ethernet found. starting USB... No controllers found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device ** No partition table - mmc 0 ** starting USB... No controllers found USB is stopped. Please issue 'usb start' first. starting USB... No controllers found No ethernet found. missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-sunxi No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default No ethernet found. Config file not found starting USB... No controllers found No ethernet found. No ethernet found. => loadx 0x81000000 ## Ready for binary (xmodem) download to 0x81000000 at 115200 bps... C input sx_send_file name:rtthread.elf Sending rtthread.elf, 4069 blocks: Give your local XMODEM receive command now. Bytes Sent: 520960 BPS:9412 Transfer complete xyzModem - CRC mode, 4070(SOH)/0(STX)/0(CAN) packets, 1 retries ## Total Size = 0x0007f2f0 = 520944 Bytes => bootelf 0x81000000 CACHE: Misaligned operation at range [8002b7a0, 80030944] CACHE: Misaligned operation at range [80030948, 800315fc] CACHE: Misaligned operation at range [80034000, 8004d004] ## Starting application at 0x80000000 ... \ | / - RT - Thread Operating System / | \ 3.1.1 build Sep 24 2018 2006 - 2018 Copyright by rt-thread team [SFUD] Warning: The OS tick(100) is less than 1000. So the flash write will take more time. [SFUD] Warning: Read SFDP parameter header information failed. The gd25qxx is not support JEDEC SFDP. [SFUD] Warning: This flash device is not found or not support. [SFUD] Error: gd25qxx flash device is initialize fail. ERROR: SPI flash probe failed by SPI device spi00. periph_get_pll_clk:600000000 cpu_get_clk:408000000 ahb_get_clk:200000000 apb_get_clk:100000000 msh />[E/MMC] [err]:0x00000100, RTO [E/MMC] mmc cmd 5 err [I/[SDIO]] SD card capacity 1968128 KB. [I/[SDIO]] probe mmcsd block device! msh />help RT-Thread shell commands: list_fd - list file descriptor list_device - list device in system list_timer - list timer in system list_mempool - list memory pool in system list_msgqueue - list message queue in system list_mailbox - list mail box in system list_mutex - list mutex in system list_event - list event in system list_sem - list semaphore in system list_thread - list thread version - show RT-Thread version information help - RT-Thread shell help. exit - return to RT-Thread shell mode. free - Show the memory usage in the system. time - Execute command with time. ps - List threads in the system. echo - echo string to file df - disk free mkfs - format disk with file system mkdir - Create the DIRECTORY. pwd - Print the name of the current working directory. cd - Change the shell working directory. rm - Remove(unlink) the FILE(s). cat - Concatenate FILE(s) mv - Rename SOURCE to DEST. cp - Copy SOURCE to DEST. ls - List information about the FILEs. sf - SPI Flash operate. msh />list_device device type ref count ------ -------------------- ---------- sd0 Block Device 0 gpio Miscellaneous Device 0 spi10 SPI Device 0 spi1 SPI Bus 0 spi00 SPI Device 0 spi0 SPI Bus 0 uart2 Character Device 0 uart0 Character Device 2 msh /> Disconnected uaa@framboise:~/z/rt-thread/bsp/allwinner_tina$ exit Script done on Mon Sep 24 20:17:35 2018