Script started on Sat May  4 15:35:52 2024
uaa@framboise:~$ epicon -s 115200 -l /dev/ttyU1

** Welcome to epicon Version-5.2 Copyright Isamu Yamauchi compiled:Jun 29 2023 **
      exec shell         ~! 
      send binary files  ~f
      send break         ~b
      call rz,sz,sx,rx   ~rz,~sz,~sx,~rx
      call kermit        ~sk,~rk
      external command   ~C 
      change speed       ~c 
      exit               ~. 
      Connected /dev/ttyU1 

DDR V1.10 ec2fae0c96 wesley.yao 22/11/15-10:58:09
S5P1
fc27
rgef0
rgef1
DDRConf1
DDR2, BW=16 Col=10 Bk=4 CS0 Row=13 CS=1 Die BW=16 Size=64MB
528MHz
DDR bin out

U-Boot SPL board init
U-Boot SPL 2017.09 (May 04 2024 - 14:56:19)
unrecognized JEDEC id bytes: 00, 00, 00
unknown raw ID 0 0 0
Trying to boot from MMC2
ENVF: Primary 0x00000000 - 0x00008000
ENVF: OK
Trying fit image at 0x440 sector
## Verified-boot: 0
## Checking uboot 0x00200000 (lzma @0x00400000) ... sha256(e59ee8e834...) + sha256(5abc4eca99...) + OK
## Checking fdt 0x0025bfd8 ... sha256(51bba657c3...) + OK
Total: 234.641 ms

Jumping to U-Boot(0x00200000)


U-Boot 2017.09 (May 04 2024 - 14:56:19 +0900)

Model: Rockchip RV1106 EVB Board
PreSerial: 2, raw, 0xff4c0000
DRAM:  64 MiB
Sysmem: init
Relocation Offset: 03d85000
Relocation fdt: 02dfadb0 - 02dfedd8
CR: M/C/I
Using default environment

no mmc device at slot 1
ENVF: Primary 0x00000000 - 0x00008000
ENVF: OK
mmc@ffa90000: 0, mmc@ffaa0000: 1 (SD)
Bootdev(atags): mmc 1
MMC1: Legacy, 52Mhz
PartType: ENV
DM: v2
No misc partition
boot mode: None
No resource partition
No resource partition
Failed to load DTB, ret=-19
No find valid DTB, ret=-22
Failed to get kernel dtb, ret=-22
Model: Rockchip RV1106 EVB Board
rockchip_set_serialno: could not find efuse/otp device
CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  apll 816000 KHz
  dpll 528000 KHz
  gpll 1188000 KHz
  cpll 1000000 KHz
  aclk_peri_root 400000 KHz
  hclK_peri_root 200000 KHz
  pclk_peri_root 100000 KHz
  aclk_bus_root 300000 KHz
  pclk_top_root 100000 KHz
  pclk_pmu_root 100000 KHz
  hclk_pmu_root 200000 KHz
No misc partition
## retrieving sd_update.txt ...
bad MBR sector signature 0x0000
** Invalid partition 1 **
Net:   eth0: ethernet@ffa80000
Hit key to stop autoboot('CTRL+C'):  0 
## Booting FIT Image FIT: No fit blob
FIT: No FIT image
Could not find misc partition
ANDROID: reboot reason: "(none)"
No valid android hdr
Android image load failed
Android boot failed, error -1.
=> bdinfo
Unknown command 'bdinfo' - try 'help'
=> printenv
arch=arm
autoload=no
baudrate=115200
blkdevparts=mmcblk1:32K(env),512K@32K(idblock),256K(uboot),32M(boot),512M(oem),256M(userdata),6G(rootfs),-(media)
board=evb_rv1106
board_name=evb_rv1106
bootargs=storagemedia=sd androidboot.storagemedia=sd androidboot.mode=normal 
bootcmd=boot_fit;boot_android ${devtype} ${devnum};
bootdelay=0
cpu=armv7
devnum=1
devtype=mmc
eth1addr=32:89:3b:fa:55:8b
ethaddr=2e:89:3b:fa:55:8b
fdt_addr_r=0x00c00000
kernel_addr_c=0x00808000
kernel_addr_r=0x00008000
pxefile_addr_r=0x00c00000
ramdisk_addr_r=0x000e00000
rkimg_bootdev=if mmc dev 1 && rkimgtest mmc 1; then setenv devtype mmc; setenv devnum 1; echo Boot from SDcard;elif mmc dev 0; then setenv devtype mmc; setenv devnum 0;elif mtd_blk dev 0; then setenv devtype mtd; setenv devnum 0;elif mtd_blk dev 1; then setenv devtype mtd; setenv devnum 1;elif mtd_blk dev 2; then setenv devtype mtd; setenv devnum 2;elif rknand dev 0; then setenv devtype rknand; setenv devnum 0;elif rksfc dev 0; then setenv devtype spinand; setenv devnum 0;elif rksfc dev 1; then setenv devtype spinor; setenv devnum 1;else;setenv devtype ramdisk; setenv devnum 0;fi; 
scriptaddr=0x00b00000
soc=rockchip
stderr=serial
stdin=serial
stdout=serial
sys_bootargs= root=/dev/mmcblk1p7 rootfstype=ext4 rk_dma_heap_cma=24M
vendor=rockchip

Environment size: 1347/262140 bytes
=> 
Disconnected
uaa@framboise:~$ 
exit

Script done on Sat May  4 15:36:31 2024